Indirect Air Heaters are an advanced Shell and Tube design heat exchanger.
The flue gases pass through the main combustion chamber connected through
flue tubes, arranged to give three pass; while the air is forced over the
combustion chamber and flue tubes thus delivering clear uncontaminated hot
Indirect Air Heaters are fitted with a high efficiency fully automatic
pressure jet burner for complete combustion.
The pre wired control panel
incorporates electronic safety and monitoring devices such as temperature
controller, sequence controller with flame sensor, fuses, contactors, over
current relays etc.
COST SAVING ADVANTAGES:
Indirect Air Heaters will deliver clear uncontaminated hot air. This will
avoid the use of any intermediatory heating media such as steam, hot water
or thermic fluid. This will eliminate heat exchanger, control valves and
consequently the problems associated with these media.
Indirect Air Heaters are factory pre-assebled, self contained packaged.
Units ready for installation, requiring only fuel, chimney and electrical